Home

A. G. Russell Knives

Contact Us

A.G. Russell Camillus Knife
"Mother of Pearl Grandaddy Barlow"
Proudly made in the U.S.A.
Order #AGRCM278

A.G. Russell Camillus Knife "Mother of Pearl Grandaddy Barlow". Beautiful genuine mother of pearl handle scales. Satin finished stainless steel clip point blade with long nail pull. Blade has strong open, close, and half snap. Tang stamped "A.G.R. CO. CM-2 ARK. USA - CAMILLUS 278". Brass liners. Nickel silver fluted bolsters, handle pins, and inlaid knife with a knife shield. Elegantly file worked spine. Awesome A.G. Russell collectors piece in great condition.

Features:
Blade Material: Stainless Steel
Handle Material: Genuine Mother of Pearl
Blade Length: 4"
Closed Length: 5-1/8"
Weight: 5.4 oz

Our low internet price $199.95
A.G. Russell Camillus Pocket Knives

Quality A.G. Russell Knife
"Black Micarta Lock Back"
Made in Seki, Japan
Order #AGRBMLB

Quality A.G. Russell Knife "Black Micarta Lock Back". Black linen micarta handle scales with dark red handle spacer. Polished VG-10 stainless steel drop point blade. Nickel silver bolsters, liners, handle pins, and lined lanyard hole. This is a simple high quality pocket knife that will make a wonderful everyday carry pocket knife, it was lightly used but is still worthy of a collection.

Features:
Blade Material: VG-10 Stainless Steel
Handle Material: Black Linen Micarta
Blade Length: 2-1/8"
Closed Length: 3"
Weight: 1.6 oz

Our low internet price $59.95

Old Discontinued A.G. Russell Knife
"Rosewood & Damascus Lock Back"
Made in Japan
Order #AGRRDLB

A.G. Russell Knife "Rosewood & Damascus Lock Back". Real nice grooved rosewood handle scales. Beautiful damascus clip point blade. Mosaic damascus bolsters. Aluminum liners. If your looking for a quality made damascus knife at a great price then look no further! Comes new in a nice black zip up pouch.

Features:
Blade Material: Damascus
Handle Material: Rosewood
Blade Length: 3-1/4"
Closed Length: 4-3/8"
Weight: 4.5 oz

Our low internet price $189.95
A.G. Russell Pocket Knives

A.G. Russell Knife
"Maroon Micarta Small Hunter"
Proudly made in the U.S.A. 1989
Order #AGRMMSH

A.G. Russell Knife "Maroon Micarta Small Hunter". Maroon micarta handle scales. Satin finished stainless steel drop point hunting blade etched "19 A.G. RUSSELL 89". Full tang. Nickel silver finger guard. Stainless steel handle pins. Really an awesome piece by A.G. Russell. Proudly made in the U.S.A. in 1989.

Features:
Blade Material: Stainless Steel
Handle Material: Micarta
Blade Length: 2-7/8"
Overall Length: 6-3/4"
Weight: 2.6 oz

Our low internet price $149.95
A.G. Russell Hunting Knives

Discontinued A.G. Russell Knife
"Ebony Wood Bullet Lock Back"
Made in Japan
Order #AGR110

Discontinued A.G. Russell Knife "Ebony Wood Bullet Lock Back". Ebony wood handle scales. Mirror polished stainless steel drop point blade. Nickel silver liners and handle pins. Mirror polished stainless steel bolsters and inlaid bullet shield. Comes brand new in original two piece box.

Features:
Blade Material: Stainless Steel
Handle Material: Ebony Wood
Blade Length: 2-3/8"
Closed Length: 3-3/8"
Weight: 2.1 oz

Our low internet price $89.95
A.G. Russell Pocket Knives

Quality A.G. Russell Knife
"Stag Swing Guard Lockback"
Made in Germany
Order #AGRSSGLB

Quality A.G. Russell Knife "Stag Swing Guard Lockback". Real nice well matched genuine stag handle scales. Stainless steel clip point blade with long nail pull. Tang stamped "A.G. RUSSELL - GERMANY". Brass liners. Nickel silver bolsters, handle pins, and swinging guard. Awesome quality made A.G. Russell lock back, pocket knife that was made in Germany.

Features:
Blade Material: Stainless Steel
Handle Material: Genuine Stag
Blade Length: 3-3/8"
Closed Length: 4-3/8"
Weight: 3.7 oz

Our low internet price $119.95
Quality A.G. Russell Swing Guard Pocket Knives

Old Discontinued A.G. Russell Knife
"Jigged Bone Bolsterlock"
Made in Japan 1989
Order #AGRFH-2

Old Discontinued A.G. Russell Knife "Jigged Bone Bolsterlock". Beautiful jigged caramel bone handle scales. High polished stainless steel clip point blade. Tang stamped "A.G. RUSSELL FOR THE KNIFE COLLECTORS CLUB - FH-2 1989 JAPAN". Nickel silver bolsters, liners, handle pins, and inliad acorn shield. The front bolster splits and acts as a type of liner lock. Really a great looking piece for the Knife Collectors Club. Brand new in a black nylon belt sheath.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Bone
Blade Length: 4-1/8"
Closed Length: 5-1/4"
Weight: 6.4 oz

Our low internet price $189.95
A.G. Russell Knife Collectors Club Knives

A.G. Russell Knife "Hardwood Boot Knife"
Made in Seki City, Japan
Order #AGRBOOT

A.G. Russell Knife "Hardwood Boot Knife". Nice hardwood handles. High polished stainless steel double edge dagger blade etched "A.G. RUSSELL SPRINGDALE, ARK. SEKI-CITY JAPAN". Full tang. Fancy nickel silver guard and handle pins. Real nice A.G. Russell boot knife. Comes with a brown leather boot clip sheath.

Features:
Blade Material: Stainless Steel
Handle Material: Hardwood
Blade Length: 3-3/8"
Overall Length: 6-5/8"
Weight: 3.4 oz

Our low internet price $179.95 A.G. Russell Boot Knives

Rare Old A.G. Russell Knife "Shaw-Leibowitz Grandaddy Barlow"
Proudly made in U.S.A.
Order #AGR168CM-2

Rare Old A.G. Russell Knife "Shaw-Leibowitz Grandaddy Barlow". Brown jigged delrin handles. Stainless steel clip point that's deep etched with an awesome wolf in the woods scene and says "SHA-LEIBOWITZ #168" and has a nice long nail pull and nail nick. Blade has real strong snap. Brass liners and handle pins. Nickel silver bolsters have fancy engraving on them. Inlaid knife replica shield. This is a very cool old A.G. Russell knife that has been custom etched by Shaw-Leibowitz. Comes in a nice felt slip pouch. Knife made by Camillus for A.G. Russell.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Delrin
Blade Length: 4"
Closed Length: 5"
Weight: 5.2 oz

Our low internet price $250.00 A.G. Russell Shaw-Leibowitz Pocket Knives

Quality Randall Made Knife
"A.G. Russell Special Skinner"
Proudly made in Orlando, Florida U.S.A.
Order #RAAGRS

Quality Randall Made Knife "A.G. Russell Special Skinner". Sweet stacked leather handle with black and brass handle spacers. Carbon tool steel drop point skinner blade stamped "RANDALL MADE ORLANDO, FLA". Brass pommel with skull crusher on the end. Brass finger guard. Has jimping on the spine along with the etched serial number #018. Comes brand new in a nice zip up pouch with a Randall Made knives leather belt sheath that has sharpening stone in it.

Features:
Blade Material: Carbon Tool Steel
Handle Material: Stacked Leather
Blade Style: Drop Point Skinner
Blade Length: 4"
Overall Length: 8-3/8"
Weight: 7.5 oz

Our low Internet price only $600.00 Quality Randall Made Hunting & Skinning Knives

Rare A.G. Russell Knife "Compact Multi Tool"
Made in Seki, Japan
Order #AGRTOOL

A.G. Russell Knife "Compact Multi Tool". Stainless steel handle with stainless steel handle pins. Real nice spring loaded pliers with a lock. Stainless steel clip point blade, fully serrated blade with flat screwdriver and file, as well as a phillips screwdriver. This handy multi tool has everything you need for those day to day fixes and jobs. Comes in original box.

Features:
Blade Material: Stainless Steel
Handle Material: Stainless Steel
Blade Type: Pliers, Fully Serrated w/ flat screwdriver & file, Phillips Screwdriver
Blade Length: 2-3/8"
Closed Length: 4-3/4"
Weight: 4.8 oz

Our low internet price $200.00 A.G. Russell Multi Tool Pocket Knives

A.G. Russell Knife "Tanto Lock Back"
Made in Japan 1996
Order #AGRTLB1996

A.G. Russell Knife "Tanto Lock Back". Aluminum handle with black G-10 inlays. Nice VG-10 stainless steel tanto blade with an oblong hole for easy one hand opening. Removable pocket clip for tip up carry. Lanyard hole. Tang stamped "AG RUSSEL - VG-10 JAPAN". Awesome lock back pocket knife that would be a great and reliable everyday user. Comes brand new in original box.

Features:
Blade Material: VG-10 Stainless Steel
Handle Material: Aluminum w/ Black G-10
Blade Type: Tanto
Blade Length: 3-3/4"
Closed Length: 4-7/8"
Weight: 4.5 oz

Our low internet price $119.95 A.G. Russell Pocket Knives

A.G. Russell Knife "Large Stag Toothpick"
Proudly made in Lowell, Arkansas U.S.A. 2004
Order #AGRST2004

A.G. Russell Knife "Large Stag Toothpick". Awesome genuine stag handles. Stainless steel swedged clip point point blade. Tang stamp "A.G. RUSSELL 2004 LOWELL, AR". Brass liners. Nickel silver bolsters, handle pins, and inlaid acorn shield. Sweet A.G. Russell toothpick knife made in Lowell, Arkansas U.S.A. in 2004. Comes in a nice zip up pouch.

Features:
Blade Material: Stainless Steel
Handle Material: Genuine Stag
Blade Type: Clip Point
Blade Length: 4-1/8"
Closed Length: 5"
Weight: 3.1 oz

Our low internet price $99.95 A.G. Russell Stag Pocket Knives