Home

Case Axe

Case Stag Knives

Case
Mother of Pearl

Case
Accessories

Case Yellow
& Orange Handles

Case Knife
Bone Handles

Case
Rosewood
Pocket Knives

Case
Collectible
Knives

Case
Bowie Knives

Contact Us

Old Limited Edition Individually Hand Scrimshawed CASE Knife 3 Dot
"MOBY DICK NANTUCKET SLEIGH RIDE" Single Blade Hunter
Proudly Made in The U.S.A. 1977
Order #CAW165SSP

Old Limited Edition Individually hand Scrimshawed Case knife "Moby Dick Nantucket Sleigh Ride" single blade hunter. Genuine natural bone handles are beautifully hand scrimshawed with a scene that was real common during the 1830's and 1840's. Nickel silver bolsters are engraved with a florentine scroll design. Brass liners. Tru Sharp surgical stainless clip point blade is saber ground and features a glaze finish and a razor sharp polished edge. Comes in a shadow box presentation case made of polished northern hardwood with a walnut finish. The case has hangers on it so it can be displayed on a table top or hung on the wall. Serial Numbered.

Features:
Blade Material: Tru Sharp Surgical Stainless
Handle Material: Scrimshawed Natural Bone
Blade Type: Clip Point
Blade Length: 4-1/8"
Closed Length: 5-3/8"
Weight 4.9 oz

Our low internet price $229.95 Scrimshawed Case Knives From the 1970's

Old Discontinued Case XX Knife "Two Blade Jack"
Proudly made in the U.S.A.
Order #CA62031-1/2

Old Discontinued Case XX Knife "Two Blade Jack". Jigged black comp handles. Carbon steel clip point blade with a nice long nail pull and a pen blade. It's a great old knife with strong blade snap and solid handles. Nickel silver bolsters and inlaid Case oval shield. Brass liners and handle pins. They just don't make 'em like this anymore. Great old knife, solid in all aspects. Made circa 1940-1964.

Features:
Blade Material: Carbon Steel
Handle material: Jigged Comp
Blade Length: 2-1/2"
Closed Length: 3-3/4"
Weight: 3 oz

Our low internet price only $99.95 Old Discontinued Case XX Pocket Knives

Old Case XX NKCA Knife "1985 NKCA Saddle Horn Large Trapper"
Proudly made in the U.S.A.
Order #CAG6240SP

Old Case XX NKCA Knife "1985 NKCA Saddle Horn Large Trapper". Sweet jigged mossy green bone handles with brass handle pins. High polished stainless steel clip point and spey blades. The clip point blade is etched "NATIONAL KNIFE COLLECTORS 1985". Nickel silver bolsters, the front bolster is etched with the serial number "L0150". Brass liners. Nickel silver inlaid National Knife Collectors Association (NKCA) shield. Great old Case XX pocket knife.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Mossy Green Bone
Blade Length: 3-1/2"
Closed Length: 4-1/2"
Weight: 4.2 oz

Our low internet price $79.95 Case XX Bone Handle Pocket Knives

Discontinued Case Knife "Marlin Spike Sailors Knife"
Proudly Made in the U.S.A.
Order #CA00125

Discontinued Case Knife "Marlin Spike Sailors Knife". Brown jigged delrin handles. Stainless steel sheepsfoot blade and locking marlin spike. The blade and marlin spike both have great snap. Nickel silver bolsters and marlin spike lock release. Nickel silver inlaid Case oval shield. Stainless steel handle pins. Brass liners. Nice discontinued Case marlin spike sailors knife. Coomes brand new in box.

Specifications:
Blade - Stainless Steel
Handle - Jigged Brown Delrin
Blade Length - 3"
Closed Length - 4-1/2"
Weight - 2.7 oz

Our Low Internet Price $89.95 Discontinued Case Sailors Pocket Knife

Old Discontinued Case XX Knife "Walnut Rope Knife"
Proudly Made in The U.S.A. 1965 to 1969
Order #CA11031SH

Old Discontinued Case "Walnut Rope Knife". Walnut handles. Carbon steel sheepsfoot blade that is swedged toward the tip and has a nice long nail pull. Strong open, close, and half snap on the blade. Tang stamped "CASE XX U.S.A. - 11031 SH". Brass liners and handle pins. Nickel silver bolsters and inlaid Case oval shield. Nice old Case Rope knife made in the U.S.A. from 1965 until 1969.

Features:
Blade Material: Carbon Steel
Handle Material: Walnut
Blade Length: 2-3/4"
Closed Length: 3-7/8"
Weight: 2.1 oz

Our low internet price $99.95 Old Case XX Pocket Knives

Rare Old CASE Knife "Serpentine 3 Blade Stockman" 1965-1969
Proudly Made in The U.S.A.
Order #CA4318HP

Rare Old CASE Knife "Serpentine 3 Blade Stockman" 1965-1969. Three high polished stainless steel blades a turkish clip point, a sheepsfoot, and a spey. The spey blade is etched "FOR FLESH ONLY". All of the blades have great snap. White composition handles. Nickel silver inlaid Case oval sheild and handle pins. One piece nickel silver liners and bolsters. Awesome old Case knife in great condition. Proudly made in the U.S.A. in 1965-1969.

Features:
Blade Material: Stainless Steel
Handle Material: White Composition
Blade Length: 2-3/4"
Closed Length: 3-5/8"
Weight: 2 oz

Our low internet price $129.95 Rare Old Case Pocket Knives

Rare Old CASE Knife "Split Back Whittler" 1974
Proudly Made in The U.S.A.
Order #CA1974SBW

Rare Old CASE Knife "Split Back Whittler" 1974. Nice dark brown jigged delrin handles. Stainless steel large and small clip point and small coping blades. Tang is stamped "CASE XX U.S.A." with six dots. Blades all have great snap. Nickel silver bolsters, liners and handle pins. Nickel silver inlaid classic CASE oval shield. Sweet old Case pocket knife.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Delrin
Blade Length: 2-7/8"
Closed Length: 3-7/8"
Weight: 2.7 oz

Our low internet price $99.95 Old Case Pocket Knives

Rare Case Knife "Tiny Toothpick" Limited Edition
Proudly made in the U.S.A.
Order #CA06294

Rare Case Knife "Tiny Toothpick." Limited Edition. Real nice rare lace wood handles. Stainless steel extremely sharp clip point blade. Nickel silver bolsters and inlaid "CASE XX" shield. Brass handle pins and liners. Cute little pocket knife with the piece of mind of Tested XX that proves that the blade has been properly tempered and tested. Made 10/08/06.

Specifications:
(Blade) Steel - Stainless Steel
Handle - Lace Wood
Blade Length - 2-1/4"
Closed - 3"
Weight - 0.9 oz

Our Low Internet Price $49.95 Case Toothpick Pocket Knives

Rare Case Knife "Baby Butterbean" Limited Edition
Proudly made in the U.S.A.
Order #CA06295

Rare Case Knife "Baby Butterbean." Limited Edition. Real nice rare lace wood handles. Two stainless steel extremely sharp spear point blades one large and one small. Both are double swedged and have nice long nail pulls.. Nickel silver bolsters and inlaid "CASE XX" shield. Brass handle pins and liners. Cute little pocket knife with the piece of mind of Tested XX that proves that the blade has been properly tempered and tested. Made 10/10/08.

Specifications:
(Blade) Steel - Stainless Steel
Handle - Lace Wood
Blade Length - 1-7/8"
Closed - 2-3/4"
Weight - 1.4 oz

Our Low Internet Price $59.95 Case Wood Handle Pocket Knives

Limited Edition Case Knife "Large Ebony Toothpick"
Proudly made in the U.S.A.
Order #CA08366

Limited Edition Case Knife "Large Ebony Toothpick." Extraordinary ebony wood handles. Stainless steel extremely sharp clip point blade. Fancy engraved nickel silver bolsters. Nickel silver inlaid "CASE XX" shield. Brass handle pins and liners. Awesome pocket knife with the piece of mind of Tested XX that proves that the blade has been properly tempered and tested. Brand new in box. Made 11/12/08.

Specifications:
(Blade) Steel - Stainless Steel
Handle - Ebony Wood
Blade Length - 4-5/8"
Closed - 5-1/2"
Weight - 3.3 oz

Our Low Internet Price $79.95 Case Toothpick Pocket Knives

Old Case Knife "Smooth Red Appaloosa Bone Jack"
Made in The U.S.A. 1980
Order #CASR6244

Old Case Knife "Smooth Red Appaloosa Bone Jack". Beautiful smooth red Appaloosa bone handles. High polished chrome vanadium clip point and pen blades. Nickel silver bolsters. Brass liners and handle pins. Tang stamped "CASE XX USA". Cute little pocket knife by CASE.

Specifications:
Blade - Chrome Vanadium
Handle - Smooth Red Bone
Blade - Clip and Pen
Closed - 3-3/8"
Weight - 1.8 oz

Low Internet Price $59.95 CASE Bone Pocket Knives

Rare Old Discontinued WINCHESTER CASE Knife "Large Sleeve Board"
Proudly Made in U.S.A.
Order # WI62091

Rare Old discontinued WINCHESTER CASE Knife "Large Sleeve Board". Honey jigged bone handles. Stainless spear point blade etched with "WINCHESTER TRADE MARK" and pen blade. Nickel silver bolsters and inlaid shield. Brass handle pins and liners. Nice strong open and close snap. Nice knife by WINCHESTER and W.R. Case & Sons. Made in Bradford, Pennsylvania U.S.A. in 1990. One side of main blade tang stamped "WINCHESTER -TRADE MARK- MADE IN USA" the other side W.R. CASE & SONS BRADFORD, PA. 19USA90". The small blade tang stamped on one side "WINCHESTER -TRADE MARK- MADE IN USA" and the model #62091 on the other side.

Features:
Model#: WINCHESTER Case Large Sleeve Board
Blade Material: Stainless Steel
Handle Material: Jigged Bone
Blade Type: Spear Point and Pen
Blade Length: 3-1/2"
Closed Length: 4-5/8"
Weight: 3.7 oz

Our low internet price $139.95 CASE WINCHESTER Pocket Knives

Rare Antique Case Tested XX knife "Rough Black Stockman" Vintage 1920-1940
Proudly Made in The U.S.A.
Order #CATXXSM

Vintage Case Tested XX knife "Rough Black Stockman". Beautiful old rough black composition. Large clip point, sheepsfoot and spey blades. It's a rare old beauty with strong blade snap on all blades and solid handles. Nickel silver bolsters and inlaid "CASE" shield. Nickel silver liners and handle pins. They just don't make 'em like this anymore. Professionally cleaned it's really nice.

Features:
Make Model: Case Tested XX EZ Pull 2 Blade
Blade Length: 3"
Closed Length: 4"
Handle material: Rough Black Comp
Blade material: Carbon steel
Weight: 2.8 oz

Our low internet price only $325.00

Discontinued Case knife "SCOUT CAMP Knife"
Proudly Made in The U.S.A. 1973
Order #CA640045R

Discontinued Case knife, "Scout Camp Knife". Jigged delrin handles. Large spear blade, can opener, cap lifter with screwdriver and leather punch. Inlaid nickel silver Case oval shield. Nickel silver bolsters with bail at one end. Brass liners. Nickel silver handle pins. Would make a great user or a nice piece for any collection. Born 1973.

Features:
Make Model: Case Scout Camp Knife
Blade Length: 2-3/4"
Closed Length: 3-3/4"
Handle material: Jigged Delrin
Blade material: Surgical Stainless steel
Weight: 3.4 oz

Our low internet price only $69.95 Case Pocket Knives

Limited Edition 2004
Tony Bose Custom Series Case Knife "Muskrat"
Proudly Made in The U.S.A.
Order #CATB622004

Discontinued Tony Bose designed Custom knife Slip Joint Case knife "Muskrat". A favorite old pattern, Hand finished blade of premium ATS-34. Antique jigged bone handle with stainless bolsters, liners and pinned on crest shield. A great looking quality knife. Comes in nice zip up pouch. Very Limited.

Features:
Make Model: Case Tony Bose Muskrat
Blade Length: 2-7/8"
Closed Length: 4"
Handle material: Jigged Antique Bone
Blade material: ATS-34
Weight: 2.6 oz

Internet price only $299.95 Tony Bose Series Case Knives

Rare Limited Edition Case Knife "Dr. Ralph Stanley Elephant Toe" 2005
Proudly Made in The U.S.A
Order #CA6250DRS

Rare 2005 Limited Edition Case knife "Dr. Ralph Stanley" Elephant Toe Knife. A beautiful Case knife made to commemorate blue grass legend Dr. Ralph Stanley. Natural bone handle has likeness of the Dr. very nicely laser engraved on both sides. Nickel silver bolsters are all engraved. Brass liners and handle pins.

Specifications:
(Blade) Steel - Tru Sharp Surgical Stainless
Handle - Natural Bone
Blades - Large and Small
Closed - 4-1/2"
Weight - 4.9 oz

Our low internet price $229.95 Hard to find Case Pocket Knives

Rare Limited Premier Edition Case Knife
"Doctors Knife with Fire in The Box Corelon Handle"
Proudly Made in The U.S.A.
#CA9185FIB

Rare Limited Premier Edition Case Knife "Doctors Knife with Fire In THe Box Corelon Handles". Only 500 made, this unique handle material will never shrink or crack. Nickel silver bolsters and inlaid Case shield, brass liners. Surgical stainless blade has Premier Edition etch.

Specifications:
(Blade) Steel - Surgical Stainless
Handle - Fire in the Box Corelon
Blades - Pen Blade
Closed - 3-5/8"
Weight - 1.6 oz

Our Low Internet Price $79.95 Case Doctors Pocket Knives

Old Discontinued Case XX Knife "The GENERAL" 1980
Proudly Made in The U.S.A
Order #CA1199SHRG

Old discontinued Case XX knife "The General". Tang stamp is "CASE XX STAINLESS U.S.A." with one dot and on the other side of blade, model number 1199SHR stamped. Large sheepsfoot blade has etch of train and say's "The GENERAL". Handles are walnut. Blade has strong snap, open and close and half stop. Nickel Silver bolsters and bale on one end. Brass handle pins and liners. Another really great older Case knife in original old style box.

Features:
Make Model: Case 1199SHR The General
Closed Length: 4-1/4"
Handle material: Walnut Wood
Blade material: Stainless steel
Weight: 3 oz

Our low internet price only $69.95 Discontinued Case Pocket Knives

Old Discontinued Case Knife 9 Dot Smooth Delrin Handle "Daddy Barlow " 1981
Proudly Made in The U.S.A
Order #CA6143

Old discontinued Case knife "Daddy Barlow". A large smooth delrin handle, pocket knife with a high polished clip point blade. This pattern hasn't been made since 1989. Nickel silver bolsters. Brass liners and handle pins. Made in 1981, Case 9 dot knife. this knife has strong open, close and half snap. A really great knife.

Specifications:
(Blade) Steel - Chrome Vanadium
Handle - Smooth Delrin
Blades - Clip Point
Closed - 5"
Weight - 4.3 oz

Our Low Internet Price $89.95 Hard to find Case Pocket Knives from the 1980's

Rare Antique Case XX U.S.A. knife "Stag Swell End Jumbo Jack"
Vintage 1965-1969
Proudly Made in The U.S.A.
Order #CA5299-1/2

Rare old Case XX U.S.A. knife "Stag Swell End Jumbo Jack". Beautiful old stag handles. A clip point and a pen blade. It's a rare old beauty with strong blade snap and solid handles. Nickel silver bolsters and inlaid "CASE" shield. Brass liners and handle pins. They just don't make 'em like this anymore. Great old knife, solid in all aspects.

Features:
Make Model: Case XX U.S.A. Muskrat
Blade Length: 2-7/8"
Closed Length: 3-7/8"
Handle material: Jigged Bone
Blade material: Carbon steel
Weight: 2.7 oz

Our low internet price only $249.95 Rare Case XX U.S.A. Pocket Knives

CASE Knife "Limited Edition Barlow " 2006
Proudly Made in The U.S.A.
Order #CA20076

A rare and elegant Case knife, "Limited Edition Barlow". Beautiful dark Molasses jigged bone handles. Brass liners and handle pins. Nickel silver bolsters and inlaid shield. Clip point and pen blade. Main blade has Limited Edition black and gold etch. Made Oct 16, 2006.

Features:
Make and Model: Case Limited Edition Barlow
Blade Material: Tru-Sharp Surgical Stainless
Handle Material: Dark Molasses Jigged Bone
Closed Length: 3-3/8"
Weight: 2.8 oz

Our low internet price $89.95 Old Case Pocketknives

Rare Antique Case Tested XX knife "EZ Pull 2 Blade" Vintage 1920-1940
Proudly Made in The U.S.A.
Order #CATXXEZP2B

Vintage Case Tested XX knife "EZ Pull 2 Blade". Beautiful old jigged rogers bone. Large spear point blade and pen blade. It's a rare old beauty with strong blade snap and solid handles. Nickel silver bolsters and inlaid "CASE" shield. Brass liners and handle pins. They just don't make 'em like this anymore.

Features:
Make Model: Case Tested XX EZ Pull 2 Blade
Blade Length: 2-1/2"
Closed Length: 3-3/8"
Handle material: Jigged Rogers Bone
Blade material: Carbon steel
Weight: 2.4 oz

Our low internet price only $450.00 Vintage Case Tested XX Pocket Knives

Old Discontinued Case XX Knife "WHALER" 1984
Proudly Made in The U.S.A
Order #CA1199SHR

Old discontinued Case XX knife "Whaler". Tang stamp is "CASE XX" lightning "SS" with six dots and "U.S.A." on one side of blade, model number 1199SHR stamped on the other side. Large sheepsfoot blade has etch of Whale and says "CASE XX WHALER". Handles are walnut. Blade has strong snap, open and close. Nickel Silver bolsters and bale on one end. Brass handle pins and liners. Another really great older Case knife.

Features:
Make Model: Case Whaler 1199SHR
Closed Length: 4-1/4"
Handle material: Walnut Wood
Blade material: Stainless steel
Weight: 3 oz

Our low internet price only $69.95 Case XX Pocket Knives

Discontinued CASE Knife "DUCKS UNLIMITED LOCKKNIFE"
Proudly Made in The U.S.A. 1995
Order #CADU1225

Ducks Unlimited Inc. Case knife "Ducks Unlimited Lockknife". Nice light weight lock blade knife. Green delrin handle with gold ducks head inlaid shield and lanyard or key ring hole. Drop point stainless blade has ducks head etch and say's "DUCKS UNLIMITED". Comes in nice two piece Case knives Ducks Unlimited box.

Features:
Blade Material: Tru Sharp Surgical Stainless
Handle Material: Green Delrin
Blade Type: Drop Point
Blade Length: 2-1/4"
Closed Length: 3"
Weight .8 oz

Our low internet price $29.95 Ducks Unlimited Case Pocket Knives

Old Case knife "Bradford Centennial Pen Knife" 1879-1979
Proudly Made in The U.S.A.
Order #CA278BC

Old Case knife, "Bradford Centennial Pen Knife". Imitation ivory handles with "1879-1979 CITY OF BRADFORD PENNSYLVANIA Centennial Year" printed on one side. 2 blades both with nice extra grind on top and excellent snap. Brass liners are thicker than most. Would make a great user or a nice piece for any collection. Two dot knife.

Features:
Make Model: Case Bradford Centennial Pen Knife
Blade Length: 1-3/4"
Closed Length: 3-1/8"
Handle material: Imitation Ivory
Blade material: Surgical Stainless steel
Weight: 1.5 oz

Our low internet price only $69.95 Case Pocket Knives

W. R. CASE Knife Swinguard 1983 "National Knife Collectors Association"
Proudly Made in The U.S.A.
Order #CAC61050L

Case 1983 NKCA collector knife. This big, old folding-guard midlock is very nice. High polish clip blade is swedged and has nice long, nail-pull, classy and easy to open. 1 of 6000, "NKCA 1983" is etched on blade, brass liners, nickel silver bolsters and swing guard. Locks-up tight as can be. Brown jigged, rogers bone handles are mint. Inlaid NKCA shield. Any serious knife collector would be proud to own this awesome knife. Already 23 years old, a great investment.

Features:
Blade Material: Tru Sharp Surgical Stainless
Handle Material: Brown Jigged Rogers Bone
Blade Type: Clip Point
Blade Length: 4-1/8"
Closed Length: 5-3/8"
Weight 6.1 oz

Our low internet price $159.95
W.R. Case Knives made special for the NKCA (National Knife Collectors Association)

Limited Edition
Case Knife "Johnny Cash Trapper"
Made in The U.S.A.
Order #CA6771

Case knife "Johnny Cash Trapper" Johnny Cash became one of the world's most beloved rebels. Belting tunes of loneliness, anger, and love for most of his 71 years. W.R. Case and Sons Cutlery Company pays tribute to this American Legend with a hand crafted, Genuine, Natural-Bone, pocketknife. Brass liners and handle pins, gleaming nickel silver bolsters. Knife born 102/27/2007.

Specifications:
(Blade) Steel - Tru-Sharp® Surgical Stainless Steel
Handle - Natural Bone
Blade - Clip and Spey
Closed - 4-1/4"
Weight - 3.8 oz

Features:
Nickel Silver Bolsters
The Man in Black with Guitar etched on Clip Blade

Low Internet Price $79.95

CASE Pocket knife "2 Blade Jack" 1997 2 Dot
Proudly made in The U.S.A
Order # CA62009-1/2

Absolutely beautiful, rare Red Appaloosa bone handle, Case Knife "2 Blade Jack". Clip and Pen blades brass liners. Nickel silver bolsters and inlaid shield. Born December 4, 1997.

Make Model:
Case Jack
Blade length: 2-7/16"
Closed length: 3-3/8"
Handle material: Smooth Appaloosa Bone
Blade material: Stainless
Weight: 3.1 oz

Our low internet price only $69.95 Collectible Case Pocket knives

Case Knife "Mini Trapper" Custom
"Clip and Spey Blades"
Order #CA029C

The Case "Mini Trapper" pocket knife has two handy knife blades that are useful for the camper, hunter, outdoorsman or general adventurer.

Specifications:
(Blade) Steel - Chrome Vanadium Carbon Steel
Handle - Turquoise, Black Onyx, Red Coral and Exotic Hardwood
Blades - Clip and Spey Blades
Closed - 3-1/2"
Weight - 2.6 ounces

Low Internet Price on this fine Custom only $89.95