Home

Case Axe

Case Stag Knives

Case
Mother of Pearl

Case
Accessories

Case Yellow
& Orange Handles

Case Knife
Bone Handles

Case
Rosewood
Pocket Knives

Case
Collectible
Knives

Case
Bowie Knives

Contact Us

Case XX Knife "Tested Red Bone Trapper Lock"
Proudly made in the U.S.A.
Order #CA6597

Case XX Knife "Tested Red Bone Trapper Lock". Nice saw cut red bone handles. High polished stainless steel clip point blade. Brass liners and handle pins. High polished nickel silver pinched front bolsters, rear bolsters, and inlaid bowtie Case XX shield. The thumb stud and liner lock make for easy one handed operation. Born 03/01/10. Comes brand new in box.

Features:
Blade Material: Stainless Steel
Handle Material: Saw Cut Bone
Blade Length: 3-1/4"
Closed Length: 4-1/8"
Weight: 3.5 oz

Our low internet price $89.95 Case Trapper Lock Pocket Knives

Case XX Knife "Molasses Jigged Bone Mini Muskrat"
Proudly made in the U.S.A.
Order #CA8497

Case XX Knife "Jigged Bone Mini Muskrat". Real nice jigged molasses bone handles. High polished stainless steel twin turkish clip point blades. Brass liners and handle pins. High polished stainless steel pinched bolsters and inlaid bowtie Case XX shield. Born 07/24/08. Comes brand new in box.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Bone
Blade Length: 2-1/2"
Closed Length: 3-5/8"
Weight: 2.2 oz

Our low internet price $49.95 Case XX Pocket Knives

Rare Old Antique Case Tested XX Knife "Coke Bottle Hunter"
Proudly made in the U.S.A. 1920-1940
Order #CATXXCBH

Rare Old Antique Case Tested XX Knife "Coke Bottle Hunter". Real nice Antique jigged bone handles one small chip at rear bolster. High polished saber ground clip point blade. Brass liners and handle pins. Nickel silver bolsters and inlaid Case oval shield. Tang stamped "CASE TESTED XX". Good strong open, close, and half snap. This is one sweet antique Case XX knife that was made from 1920 until 1940. Comes in a nice black felt slip pouch.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Bone
Blade Length: 4-1/8"
Closed Length: 5-1/2"
Weight: 5.9 oz

Our low internet price $450.00 Antique Case XX Bone Handle Pocket Knives

Rare Case Classic XX Knife "Bone Stag Zipper"
Proudly made in the U.S.A. 1993
Order #CA61072

Rare Case Classic XX Knife "Bone Stag Zipper". Sweet genuine Rogers bone stag handles. High polished stainless steel wide clip point blade etched "XX CASE'S ZIPPER XX". Nickel silver bolsters and inlaid Case Zipper oval shield. Brass liners and handle pins. The blade has super strong snap like an alligator bite. Less than 250 ever made. Proudly made in the U.S.A. in 1993. Comes in the classic Tested XX original two piece box with certificate of authenticity.

Features:
Blade Material: Stainless Steel
Handle Material: Rogers Bone Stag
Blade Length: 4-1/4"
Closed Length: 5-1/2"
Weight: 7.4 oz

Our low internet price $275.00 Case Classic XX Pocket Knives

CASE XX U.S.A. Knife "Hunter Green Copperlock"
Proudly made in the U.S.A. 2007
Order #CA7238

CASE XX U.S.A. Knife "Hunter Green Copperlock". Beautiful hunter green, jigged bone handles. High polished stainless steel clip point blade with nice long nail pull. Brass liners and handle pins. Nickel silver bolsters, the rear bolster is stamped "XX". Nickel silver inlaid Case XX oval shield. Born 10-08-2007 in the U.S.A. Comes brand new in box.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Hunter Green Bone
Blade Length: 3-1/4"
Closed Length: 4-1/4"
Weight: 3 oz

Our low internet price $89.95 Case XX Bone Handle Pocket Knives

Old CASE XX U.S.A. Knife "Large Red Bone Stockman"
Proudly Made in The U.S.A. 1965 to 1969
Order #CAUSA6375

Old CASE XX U.S.A. Knife "Large Red Bone Stockman". Beautiful jigged red bone handles. High polished stainless steel clip point, sheepsfoot, and spey blades. All blades have good strong snap. Tang is stamped "CASE XX U.S.A. - 6375". Nickel silver bolsters, handle pins, and liners. Nickel silver inlaid Case oval shield. Made in the U.S.A. from 1965 until 1969. Beautiful knife in mint condition and comes in a nice black zip up pouch.

Features:
Blade Material: Stainless Steel
Handle Material: Jigged Red Bone
Blade Length: 3-3/8"
Closed Length: 4-3/8"
Weight: 3.6 oz

Our low internet price $225.00 Old Case XX Bone Handle Pocket Knives

CASE Family Brands Crandall Cutlery Knife "Olive Green Bone Congress"
Proudly Made in The U.S.A.
Order # CA7342

CASE Family Brands Crandall Cutlery Knife "Olive Green Bone Congress". Awesome olive green jigged bone handles. Four Tru-Sharp surgical stainless steel blades. A large sheepsfoot blade, a spear point blade, a coping blade, and a pen blade. All the blades have nice long nail pulls and great snap. Brass liners and handle pins. Nickel silver bolsters and inlaid Crandall bowtie shield. Born 1-15-2007. Comes brand new in a nice two piece box.

Features:
Blade Material: Tru--Sharp Surgical Stainless
Handle Material: Jigged Olive Green Bone
Blade Length: 2-3/8"
Closed Length: 3-3/8"
Weight: 2.5 oz

Our low internet price $79.95 Case Bone Handle Pocket Knives

Case Knife "Limited Edition Split Back Whittler"
Proudly Made in The U.S.A.
Order #CA20073

Case Knife "Limited Edition Split Back Whittler". Beautiful dark Molasses jigged bone handles. Brass liners and handle pins. Nickel silver bolsters and inlaid shield. High polished stainless steel clip point blade etched in black and gold with "LIMITED XX EDITION 1 OF 3000", smaller clip point blade, and pen blade. Born 12/13/2006. Comes brand new in original Case box.

Features:
Blade Material: Tru-Sharp Stainless Steel
Handle Material: Dark Molasses Jigged Bone
Blade Length: 2-3/8"
Closed Length: 3-1/2"
Weight: 2.1 oz

Our low internet price $69.95 Limited Edition Case Bone Handle Pocket Knives

CASE Classic Knife "Dark Red Bone Bartenders Knife"
Proudly Made in The U.S.A.
Order #CA5520

CASE Classic Knife "Dark Red Bone Bartenders Knife". Awesome dark red jigged bone handles. Four Tru-Sharp surgical stainless steel blades with nice long nail pulls. A swedged spear point blade, a swedged pen blade, a swedged foil blade, and a corkscrew. Brass handle pins and liners. Nickel silver bolsters and inlaid Case script shield. Born 1-27-2004. Comes brand new in box.

Features:
Blade Material: Tru--Sharp Surgical Stainless
Handle Material: Jigged Red Bone
Blade Length: 2-5/8"
Closed Length: 3-7/8"
Weight: 3.1 oz

Our low internet price $79.95 Case Classic Tested XX Bone Handle Pocket Knives

Case Knife "Coca Cola Blue Bone Peanut" 2002
Proudly Made in The U.S.A.
Order# CA64713

Case Knife "Coca Cola Blue Bone Peanut". Sweet light and dark jigged blue bone handles. High polished stainless steel clip point blade. Tang is stamped "CASE XX" on the front and "USA 6120 SS" on the back. Brass liners and handle pins. Nickel silver bolsters. Awesome inlaid Coca-Cola oval shield. Born 05/02/02. Comes brand new in a nice Coca-Cola tin with a Case XX coin.

Specifications:
Blade Steel: Stainless Steel
Handle: Blue Jigged Bone
ClosedLength: 2-1/4"
Blade Length: 2-7/8"
Weight: 1 oz

Our Low Internet Price $59.95 American Flag Bone Handle Case Pocket Knives

Case Knife "U.S. Flag Muskrat & Belt Buckle" 2003
Proudly Made in The U.S.A.
Order# CAUSAMBB

Case Knife "U.S. Flag Muskrat & Belt Buckle". Nice navy blue jigged bone handles. Two high polished stainless steel twin clip point blades. Inlaid stainless steel Case XX oval shield with American flag background. Nickel silver bolsters. Brass handle pins and liners. Comes in a case American flag tin with a solid pewter Case XX belt buckle just like the inlaid shield. Awesome U.S.A. commemorative Case knife.

Specifications:
Blade Steel: Stainless Steel
Handle: Navy Blue Jigged Bone
ClosedLength: 3-7/8"
Blade Length: 3"
Weight: 2.6 oz

Our Low Internet Price $69.95 American Flag Bone Handle Case Pocket Knives

Old CASE Six Dot Knife "Cheetah Swing Guard Lock Back" 1974
Proudly Made in The U.S.A.
Order #CA6111-1/2L

Old CASE Six Dot Knife "Cheetah Swing Guard Lock Back" 1974. Awesome cheetah pattern red jigged bone handles. Carbon steel clip point blade with nice deep nail knick. Tang is stamped "CASE XX U.S.A." with six dots below it on the front and "6111-1/2L" on the back. Brass liners. Nickel silver handle pins, bolsters, and swinging guard. Nickel silver inlaid Case oval shield. Sweet old Case knife made in the U.S.A. in 1974.

Features:
Blade Material: Carbon Steel
Handle Material: Cheetah Jigged Red Bone
Blade Length: 3-1/2"
Closed Length: 4-3/8"
Weight: 3.5 oz

Our low internet price $125.00 Case Six Dot Bone Handle Pocket Knives

Pocket Worn Case Knife "Caribbean Blue Bone Whittler"
Proudly Made in The U.S.A.
Order# CA5135

Pocket Worn Case Knife "Caribbean Blue Bone Whittler". Rare beautiful Caribbean blue bone handles. Mirror polished large swedged clip point blade is stamped "CASE XX" with a nice long nail pull. Smaller clip point and coping blades. The smaller clip point blade is tang stamped "USA 6347 WH SS." Nickel silver bolsters and handle pins. Nickel silver inlaid CASE XX oval shield. Stainless steel liners. Born 02/27/2007. Awesome pocket knife. Comes in original CASE box.

Specifications:
Blade Steel: Tru Sharp Surgical Stainless Steel
Handle: Caribbean Blue Bone
ClosedLength: 3-7/8"
Blade Length: 3"
Weight: 2.4 oz

Our Low Internet Price $89.95 Bone Handle Case Pocket Knives

CASE Classic Tested XX Knife "Sleeve Board Moose" 1990
Proudly Made in The U.S.A.
Order #CA62075

Case Classic Tested XX knife "Sleeve Board Moose". Nice brown jigged bone handles. Large high polished swedged clip point blade with nice long nail pull and is etched with "XX." Tang is stamped "CASE BROTHERS BRADFORD, PA 19 USA 90" on the front and back is stamped "TESTED XX 62075." Also has a large high polished spey blade. Brass handle pins and handle pins. Nickel silver bolsters. Nickel silver inlaid CASE bomb shield. Brand new in original two piece box.

Features:
Blade Material: Tru--Sharp Surgical Stainless
Handle Material: Jigged Bone
Blade Length: 3-3/8"
Closed Length: 4-1/4"
Weight: 4.3 oz

Our low internet price $189.95 Case Classic Tested XX Bone Handle Pocket Knives

CASE Classic Knife "Gunboat Canoe" 1991
Proudly Made in The U.S.A.
Order #CADR6394

Case Classic knife "Gunboat Canoe". Made in 1991 in Bradford, Pennsylvania. Nice jigged dark red bone handles. Three high polished surgical stainless blades. A large swedged spear point blade with nice deep and long nail pull, and a medium sized sheepsfoot and spey blades. Tang is stamped "CASE XX BRADFORD, PA 19 USA 91 6394." Brass handle pins and liners. Nickel silver bolsters. Nickel silver inlaid Case oval shield. Only 417 were ever made. Really an awesome knife. Brand new in original two piece box.

Features:
Blade Material: Tru--Sharp Surgical Stainless
Handle Material: Jigged Red Bone
Blade Length: 3-1/4"
Closed Length: 4-1/4"
Weight: 5.3 oz

Our low internet price $159.95 Case Classic Tested XX Bone Handle Pocket Knives

Case C. Platts Sons Cutlery Co. knife "Walnut Bone Tuxedo" 1st Run
Proudly made in The U.S.A.
Order #CA96351

Case C. Platts Sons Cutlery Co. knife "Walnut Bone Tuxedo." 1st Run. Nickel silver bolsters and inlaid bowtie shield. Brass liners and handle pins. Pretty jigged walnut bone handles. Two blades, a modified swedged wharncliffe blade etched with "C. PLATTS SONS with fancy scrolls" on the front, the back is etched "1ST RUN with Case XX symbol" and a small pen blade. Wharncliffe blade has nice long nail pull. A small pocket knife in a hard to find pattern. Made 1/28/05. Comes in a nice CASE tin with a suede slip pouch.

Model:
Blade length: 2"
Closed length: 3-1/4"
Handle material: Jigged Walnut Bone
Blade material: Stainless Steel
Weight: 0.9 oz

Our low internet price only $79.95 Case Pocket knives

CASE Classic XX Knife "Zipper Swing Guard Lock Back"
Proudly Made in The U.S.A.
Order #CAC61050L7

Case Classic XX knife "Zipper Swing Guard Lock Back". Awesome antique green banana bone handles. Large high polished swedged clip point blade with nice long nail pull and is etched with "XX." Brass handle pins. Nickel silver bolsters and swinging guard. Nickel silver inlaid "CASE'S XX ZIPPER" shield. Only 375 were ever made. Comes in original two piece box.

Features:
Blade Material: Tru--Sharp Surgical Stainless
Handle Material: Antique Green Banana Bone
Blade Length: 4-3/8"
Closed Length: 5-1/2"
Weight: 6.8 oz

Our low internet price $229.95 Case XX Bone Handle Pocket Knives

Case Knife "Olive Green Baby Doc"
Proudly made in the U.S.A.
Order #CA05584

Case Knife "Olive Green Baby Doc." Awesome olive green jigged bone handles. Stainless steel extremely sharp pen blade and spatula. Nickel silver bolsters and inlaid "CASE" bow tie sheild. Brass handle pins and liners. Great knife with the piece of mind of Tested XX that proves the blade has been properly tempered and tested. Made 7/16/05.

Specifications:
(Blade) Steel - Stainless Steel
Handle - Olive Green Jigged Bone
Blade Length - 2-1/8"
Closed - 2-7/8"
Weight - 1.3 oz

Our Low Internet Price $57.95 Case Doctor's Pocket Knives

Discontinued Case Knife "Pinched Bolster Medium Stockman"
Proudly Made in The U.S.A.
#CA8498

Quality Case knife "Medium Stockman". Beautiful jigged brown bone handles. Nickel silver pinched bolsters and bowtie inlaid "CASE" shield. Surgical stainless steel double swedged clip point blade, sheepsfoot and spey blades. Tang stamped "CASE XX" and the other side is stamped "USA 63090 SS". Brass liners and handle pins. Made 8/11/2008.

Specifications:
(Blade) Steel - Surgical Stainless
Handle - Jigged Brown Bone
Blades - Clip Point, Sheepsfoot and Spey
Closed - 3-3/8"
Weight - 2.1 oz

Our Low Internet Price $69.95 Case Medium Stockman Pocket Knives

Discontinued Case Knife "Mini Muskrat"
Proudly Made in The U.S.A.
#CA08497MM

Quality Case knife "Mini Muskrat". Beautiful jigged brown bone handles. Nickel silver pinched bolsters and bowtie inlaid "CASE" shield. Two surgical stainless steel clip point blades. Tang stamped "CASE XX" and the other is stamped "MINI MUSKRAT USA SS". Brass liners and handle pins. Made 7/24/2008.

Specifications:
(Blade) Steel - Surgical Stainless
Handle - Jigged Brown Bone
Blades - Clip Point Blades
Closed - 3-5/8"
Weight - 2.2 oz

Our Low Internet Price $59.95 Case Mini Muskrat Pocket Knives

Case Knife "Doctors Knife" Limited Edition
Proudly Made in The U.S.A.
Order #CA02431

Limited Edition, Case Knife "Doctors Knife". Genuine red jigged bone handles. High carbon stainless steel swedged spear point blade with nice long nail-pull and spatula blade. Nickel silver bolsters and handle pins. Nickel silver liners and inlaid CASE XX shield. Made 10/02/2001. Comes in really nice black display box. A very limited edition knife.

Specifications:
(Blade) Steel - High Carbon Stainless Steel
Handle - Genuine Red Jigged Bone
Blades - Spear and Spatula
Closed - 3-3/4"
Weight - 2.5 oz

Our Low Internet Price of only $129.95 Case Doctors Knives

New Pattern CASE Knife "Sway Back Jack "
Proudly Made in The U.S.A.
Order #CA7007

New Pattern CASE knife "Sway Back Jack". Beautiful jigged bone handles. Brass liners and handle pins. Nickel silver bolsters and inlaid Case shield. HIgh Carbon Chrome Vanadium wharncliffe and pen blades. Great new pattern on this knife handcrafted by CASE. Born January 28th, 2009.

Features:
Blade Material: HIgh Carbon Chrome Vanadium
Handle Material: Jigged Bone
Closed Length: 3-3/16"
Weight: 2.1 oz

Our low internet price $69.95 New Case Pocketknives

Old Antique Case XX Knife "Swell End Jack" 1940-1965
Proudly Made in The U.S.A
Order #CA6235-1/2

A rare old antique Case XX knife "Swell End Jack". Tang stamp is "CASE XX" on one side of large blade, model number 6235-1/2 clearly stamped on other side. Clip point and pen blades. Handles are beautiful old genuine jigged red bone with no cracks or blemishes. Both blades have strong snap open and close, both blades have a light patina to give them character. Nickel Silver bolsters. Brass liners and handle pins. A really great old Case knife made in the U.S.A. 1940-1965.

Features:
Make Model: Case XX Swell End Jack
Closed Length: 3-3/8"
Handle material: Genuine Jigged red Bone
Blade material: Carbon steel
Weight: 2.4 oz

Our low internet price only $139.95 Antique Case XX Pocket Knife

Old Discontinued Case Knife "Canoe" 1986 vintage
Proudly Made in The U.S.A.
#CA62131

Beautiful jigged appaloosa bone handle Case knife "Canoe". Nickel silver bolsters and oval inlaid "CASE" shield. Main blade is etched with Native American paddling a birchbark canoe. Brass liners, stainless blades. Was made in 1986.

Specifications:
(Blade) Steel - Surgical Stainless
Handle - Jigged Appaloosa Bone
Blades - Spear and Pen Blades
Closed - 3-5/8"
Weight - 2.8 oz

Our Low Internet Price $89.95 Case Canoe Pocket Knives

Old Discontinued Limited Edition CASE Knife "Large Swell End Jack " 1997
Proudly Made in The U.S.A.
Order #CAR6299-1/2

Old discontinued Limited Edition Case knife, "Large Swell End Jack". Beautiful Red jigged bone handles. Brass liners and handle pins. Nickel silver bolsters and inlaid Case shield. High Polished clip point and pen blade. Made in 1997.

Features:
Make and Model: Case Limited Edition Large Swell End Jack
Blade Material: Tru-Sharp Surgical Stainless
Handle Material: Red Jigged Bone
Closed Length: 4-1/4"
Weight: 4.8 oz

Our low internet price $99.95 Old Case Pocketknives

Special Case Knife "Rogers Bone and Damascus Mini Trapper" 1989
Proudly Made in The U.S.A
Order #CAROG6207D

The Original W.R Case & Sons Cutlery Co. "Rogers Bone and Damascus Mini Trapper", a smaller version of the most popular model ever made. This one is rare with Rogers bone handles and a gorgeous Damascus blade. Nickel silver bolsters and inlaid shield. Brass liners and handle pins. Made in 1989.

Specifications:
(Blade) Steel - Damascus
Handle -Rogers Jigged Bone
Blade - Clip Blade and Spey Blade
Closed - 3-1/2"
Weight - 2.8 oz

Our low Internet price only $169.95 Case Damascus Knives

Discontinued Case knife "Jade Bone Tuxedo" 2003
Proudly made in The U.S.A.
Order #CA1179

Discontinued Case knife "Jade Bone Tuxedo". Nickel silver bolsters and limited edition "CASE" Arrowhead inlaid shield. Brass liners and handle pins. Pretty jigged jade bone handles. Two blades a small spear point blade with nice long nail pull and a pen blade. A small knife in a hard to find pattern.

Model:
Case Jade Bone Tuxedo
Blade length: 2" and 1-3/8"
Closed length: 3-1/4"
Handle material: Jigged Jade Bone
Blade material: Carbon Steel
Weight: .9 oz

Our low internet price only $52.95 Case Pocket knives

CASE Knife Family Brands "COKE BOTTLE Hunter"
"Crandall Cutlery Company" 1905-1912
Proudly Made in Bradford PA U.S.A.
Order #CA7343

Case "Coke Bottle Hunter". Blade is tang stamped "CRANDALL CUT. CO. BRADFORD, PA.". Antique green jigged bone handles. Nickel silver bolsters and inlaid bowtie shield. Brass liners and handle pins. Comes in nice two piece box. Made November 2, 2007. Great knife - rare pattern.

Specifications:
(Blade) Steel - Surgical Stainless Steel
Handle - Antique Green Jigged Bone
Blade - Clip Point
Closed - 5-3/8"
Weight - 5.4 oz

Features:
Nickel Silver Bolsters
Brass liners
Internet Price Only $89.95

CASE Knife "Gator Jigged Bone Large Toothpick"
Proudly Made in The U.S.A.
Order #CA8245

Case knife "Large Texas Toothpick" hard to find pattern with a beautiful gator jigged bone handle. Nickel silver bolsters, inlaid shield. Brass liners and handle pins. Special Alligator etch on blade and say's "GATOR BACK". Made October 12, 2007.

Specifications:
(Blade) Steel - Tru-Sharp¨ Surgical Stainless Steel Blade
Handle - Genuine Gator Jigged Bone
Blade - Long Clip Blade
Closed - 5-1/2"
Weight - 3.3 oz

Features:
Nickel Silver Bolsters
Case XX inlaid Nickel Silver Shield
Low Internet Price $79.95 Case Knives

Case Knife "Damascus Baby Doc"
Proudly Made in The U.S.A.
Order #CA5712

Rare Case Knife "Damascus Baby Doc" Like the bigger Doctors knife in a more compact size. Knife has beautiful damascus blade and spatula. Nickel silver bolsters and inlaid shield. Burnt amber jigged bone handles. Brass liners and handle pins. Made Aug 21,2007. Very Limited production.

Specifications:
(Blade) Steel - Tru- Sharp Stainless Steel
Handle - Burnt Amber Jigged Bone
Blades - Spear and Spatula
Closed - 2-3/4"
Weight - 1.3 oz

Low Internet Price only $109.95 Damascus case pocket knife

Limited Edition 2006
Tony Bose Custom Series Case Knife "COTTON SAMPLER"
Proudly Made in The U.S.A.
Order #CA7151

Tony Bose Custom designed Slip Joint Case knife "Cotton Sampler". A rare old pattern seldom seen, used by early American traders for testing the quality of cotton for market. Hand finished blade of premium ATS-34. Antique jigged bone handle with stainless bolsters, liners and pinned on crest shield. A great looking quality knife. Comes in Case leather zip up pouch. Very Limited.

Features:
Make Model: Case Tony Bose Cotton Sampler
Blade Length: 3-1/8"
Closed Length: 4-1/8"
Handle material: Jigged Antique Bone
Blade material: ATS-34
Weight: 3.6 oz

Internet price only $329.95 Tony Bose Series Case Knives

Case Knife - "Hobo"
"Knife, Fork and Spoon"
#CA052 (Knife, Fork and Spoon) $79.95 (Amber Jigged Bone - Shown)

An all-time classic, the Hobo knife by world famous Case Knife company. We have two models; one with the knife, fork and spoon and the original Hobo with knife and fork only. The Hobo disassembles so these stainless steel utensils can be used on any adventure. The perfect holiday gift that can be cherished forever.

Specifications:
(Blade) Steel - Stainless Steel Blades
Handle - Bone
Closed - 4-1/4"

Features:
Case Logo
Nickel Silver Bolsters
Stainless Steel Knife (clip blade)
Stainless Steel Fork with Bottle Opener
Stainless Steel Spoon

Case knife Pattern "Moose" is seldom seen anymore. A big stainless clip point blade and spey or skinning blade. For you knife enthusiasts who prefer a bigger knife this one will fill the bill. Jigged Amber bone handle. Nickel silver bolsters and inlaid shield. Brass Liners. Made 8-1-2005.

Features:
Model: Case Moose
Blade Length: 3-1/4"
Closed Length: 4-1/8
Handle material: Amber Jigged Bone
Blade material: Stainless Steel
Weight: 3.7 oz

Our low internet price only $49.95 Case Knives

My First CASE Knife Navy Blue Bone
CASE Knife "Tiny Texas Toothpick"
Proudly Made in The U.S.A.
Order #CA1292

My First Case Knife "Tiny Toothpick" a Great way to Share your passion with the people in your life. It comes in a Special Box that is real classy. A Quality Hand Crafted pocket Knife make it a piece of your American History.

Specifications:
(Blade) Steel - Tru-Sharp® Surgical Stainless Steel Blade
Handle - Navy Blue Jigged bone
Blade - Long Clip Blade
Closed - 3"                                            
Weight - 1 oz

Features:
Nickel Silver Bolsters
Inlaid Nickel Silver Case Arrowhead Shield

Low Internet Price $42.95 Case Pocket Knife

Case "Bartender's Knife"
Arrowhead Inlaid Shield
Order #CA1198

The Case "Bartender's" pocket knife. Three handy knife blades and corkscrew, all blades are swedged and have nice long nail pulls. Large spear blade is tang stamped - Case XX. The pen blade has the U.S.A. and model #64130 stamped on the tang. Brass liners and handle pins. Nickel silver bolsters and special arrowhead inlaid shield says "CASE". Rare pattern. Proudly Made in the U.S.A. on 06/23/2003.

Specifications:
(Blade) Steel - Tru- Sharp Stainless Steel
Handle - Jade Jigged Bone
Blades - Spear, Pen and Foil Blades with Corkscrew
Closed - 3-1/2"
Weight - 3.2 oz

Low Internet Price only $79.95

Case Knife Ruger "Gunstock"
Sturm, Ruger Firearms Logo (20 Million Weapons Manufactured)
Order #CA06500

The Case "Gunstock" pocket knife. Two handy knife blades, the large spear blade is swedged and has a nice long nail pull, tang stamped - Case XX. The pen blade has the U.S.A. and model #6215 stamped on the tang. Rare pattern. Proudly Made in the U.S.A.

Specifications:
(Blade) Steel - Tru- Sharp Stainless Steel
Handle - Navy Blue Jigged Bone
Blades - Spear and Pen Blades
Closed - 3"
Weight - 1.6 ounces

Low Internet Price only $69.95

Case Knife Ruger "Large Gunstock"
Sturm, Ruger Firearms Logo (20 Million Weapons Manufactured)
Order #CA06501

The Case "Gunstock" pocket knife. Two handy knife blades, the large spear blade is swedged and has a nice long nail pull, tang stamped - Case XX. The pen blade has the U.S.A. and model #62130 stamped on the tang. Rare pattern. Proudly Made in the U.S.A.

Specifications:
(Blade) Steel - Tru- Sharp Stainless Steel
Handle - Navy Blue Jigged Bone
Blades - Spear and Pen Blades
Closed - 3-3/4"
Weight - 2.2 ounces

Low Internet Price only $82.95

The Case Knife "Baby Doc" is a brand new knife pattern never before produced. Like the bigger Doctors knife in a more compact size, cute as heck. Knife has the Case Bros Cutlery Co tang stamp. Nickel silver bolsters and inlaid crest shield. Comes in Case Brothers collector tin with felt carry pouch to protect this little gem. Made 02/22/2005.

Specifications:
(Blade) Steel - Tru- Sharp Stainless Steel
Handle - Chestnut Bone
Blades - Spear and Spatula
Closed - 2-3/4"
Weight - 1.3 oz

Low Internet Price only $49.95 case pocket knife

Case Knife "Trapper"
Red Bone
Proudly Made in The U.S.A.
Order #CA646

The Original W.R Case & Sons Cutlery Co. "Trapper", the most popular model ever made. Back by popular demand - nice red jigged bone handles. Nickel silver bolsters and inlaid shield.

Specifications:
(Blade) Steel - Tru-Sharp® Surgical Stainless Steel Blade
Handle - Red Jigged Bone
Blade - Clip Blade and Spey Blade
Closed - 4-1/8"
Weight - 4 oz

Features:
Nickel Silver Bolsters
Case Knife "Tent" Shield Logo in Nickel Silver
MSRP 63.95 Our low price $47.95